Write a Review

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

The Jake Seeley signature Street Sweeper tire features a directional, dual compound construction. - Center tread features softer durometer - Side tread features a harder durometer to withstand grinds

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire.

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Dirty drive train? We have you covered. Bike and wheels covered in mud? No problem! This is the perfect basic kit to clean and lube your bike. - 1 Liter Bike Wash - Bio-Degreaser, 500ml - 50ml Bio Dry Lube - Claw Brush

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

The KryptoFlex 1007 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks (sold separately). The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1007 Looped Cable is 3/8-inch x 7-feet.

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Made with recycled materials, this grip features a contoured shape and dual-density construction for ultimate support on any trail. Lock-on comfort Take the long way with the XR Endurance Comp Recycled Grip made using recycled plastics at the grip core. Contoured shaping provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers stay in place. This Dual-Density grip features a lightweight lock-on design that securely attaches to any bar. Using recycled materials in this product helps provide second life to unwanted end of life plastics. Product details - Grip core is made from recycled plastic - Contoured design comfortably supports palm to decrease fatigue - Opposing tread pattern absorbs shock in palms and increases grip at fingertips - Dual-density compound provides secure grip, control, and comfort - Continuous tread pattern optimizes grip for moisture management and shock absorption - Lock-on clamp securely holds grip core to bar, eliminating slipping Features: The net effect Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution. A global issue Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world. Better products for a better planet We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.