Write a Review

- Smart mouth geometry significantly expands the range of uses in confined spaces. - Automatically find the respective placement point after every turn. - The slim yet robust ring side is angled by 15° to the tool axis. - The high-quality surface treatment achieves a high and long-lasting corrosion protection. - With Take it easy tool finder: color coding by size.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.

High-quality L-key set out of stainless steel for hexagon socket screws by Wera. The Hex-Plus profile offers a greater contact surface in the head of the screw; the notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Comes with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. - Stainless steel prevents the transfer of extraneous rust: fasten stainless screws with stainless tools - Hex-Plus allows socket head screws to live longer - With Take-it-easy tool finder: color coding by size - Wear-resistant clip material for enhanced durability - Color-coded, easy-to-grip plastic sleeve, even at low temperatures - Comes in an almost wear-free L-key clip fastener

The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible drivers - Combo cross/straight tip screwdriver - 8 & 15mm box wrenches - Key ring holder - Weight: 131g (4.62 ounces)

- 15mm pedal wrench - Easy-to-grip rubber handle provides adequate leverage

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race!

Because even your super-fast Mavic wheels will eventually need truing, Park designed the Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings. Plus, it fits both Mavic 9mm threaded eyelets and 5.65mm integrated nipples.

The Pro Cassette Lockring Socket begins as a solid piece of alloy tool steel, then is fully machined to precise tolerances for an exacting fit you won't find anywhere else, and finally is optimally heat treated for maximum strength and longevity. Designed with the professional mechanic in mind, we included both a 5mm guide pin and a removable aluminum 12mm pin held in place magnetically and easily removed with a satisfying precision-fit "pop". The extra-deep splines ensure superior engagement while the quick spin knurling provides speed and control. Use on your Grande Torque Wrench for proper torque or use with our Pro Socket Handle or Equalizer Pedal Wrench to remove that stubborn lockring requiring a little extra leverage. Backed by Pedro's lifetime warranty. - Alloy tool steel socket is fully machined to precise tolerances for an exacting professional-level fit and optimally heat treated for maximum strength and longevity. - Features a unique dual function design with 5mm pin and removable magnetic 12mm pin. - Features extra-long splines for superior engagement, quick-spin knurling, a 3/8" square drive for use with torque wrenches, a 24mm external drive for use with Pedro's Pro Socket Handle and pedal wrenches, and a 19.8mm internal diameter with 21.5mm depth. - Fits all Shimano®, Sram®, SunRace®, SunTour®, Chris King®, and other HG® standard cassette lockrings, disc brake lockrings, and other similar fittings with 12 splines and 23.5mm outside diameter.

• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles. • Includes a set of 2 taps, 9/16" x 20 tpi • Made of high carbon steel, precision ground, and hardened to stay sharp • Fits all conventional tap handles The tap drill size for a 9/16-inch x 20 tpi thread is nominally 33/64-inch.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Park Tool's TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK. The TS-RK includes the following: • 1 - #211S Main Shaft • 4 - #749-1 Bearing Washer • 2 - #748-1 Needle Bearing • 2 - #209-2 Shaft Adjusting Collar • 1 - #229 Spring • 4 - #232-2 Split Nylon Bushing • 2 - #235-2 Split Nylon Bushing • 1 - #222-SR Right Caliper Spring • 1 - #222-SL Left Caliper Spring • 1 - Set of Installation and Adjustment Instructions

- Highly rated tool for tensioning a cable while pinch bolt is tightened

- Special cable cutter for SIS type cables and housings - Neat, clean cut - Features a cable ferrule plier - Superior quality, 1095 carbon steel

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

All Feedback Sports repair stands are designed to be excellent at home and excel in the field. The Tool Tray add-on is the ultimate service partner for the most demanding mechanics. It’s lightweight and durable design delivers easy access to tools, lubricants, spare components and accessories during tune-ups or bike washing sessions. With a towel hook, drain ports, compartmentalized tool holders and a spot for your coffee mug or adult beverage, what else could a bike mechanic need?

- Pedal thread inserts are used to replace damaged threads in cranks

FRESH out the bowels of Muc-Off Research and Development comes the NEW Bio Grease! Designed specifically for bicycle use, Muc-Off Bio Grease possesses a unique formula that prevents corrosion and water ingress so your bike’s components will last long into the future! Use Muc-Off Bio Grease to increase your performance, and ensure every ride will be smoother than your last. Muc-Off *Biodegradable Bicycle Grease is specifically blended for the unique ‘low speed’ applications found on bicycle parts where reducing friction is paramount. This premium formulation is based on renewable resources, and has a combination of extreme pressure lubricity additives and natural ‘slip’ giving it unrivaled performance in its class! Bio Grease also has the added benefit of being readily biodegradable and extremely resistant to water wash off, which helps prevent corrosion, reduce friction and improve the performance of moving parts. The guys at Muc-Off are dedicated to making eco friendly products that won’t harm you, your bike or the planet and Bio Grease is no exception. This new grease is fully biodegradable and free from any nasty petroleum based oils! NOT for use on Bicycle chains *Only contents are biodegradable. - Prevents corrosion and water ingress so your bike’s components will last longer - Specially formulated for "low speed" applications unique to bicycle parts, where reducing friction is paramount - Extremely resistant to water wash-off, which helps prevent corrosion, reduce friction and improve the performance of moving parts - Fully biodegradable and free from petroleum-based oils

Keep your work area tidy with Park's Bench Top Small Parts Holder. It's constructed from rugged stainless steel with a clear, acrylic hinged top that lets you see what's inside. It also includes 4 removable bins that are perfectly sized to hold small parts, cable end caps, grease and whatever other little items you can think of.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.

Deep penetrating formula works quickly to remove stubborn grease and grime from drivetrains. Wipes away with no rinsing required

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

All the awesomeness of the dual-sided tool but in a single Shimano or Campagnolo version. Updated in 2020, the single-sided tool now has the same size handle (1/2 inch) as the dual-sided tool. - When purchasing the chain whip, buy the 1/2-inch handle chain whip.

Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.